AR触发钩

AR Trigger Jig

2024-03-25 11:04:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This design was carved out of Hoffman Tactical's v3.1 super lower.

The goal was to make decent trigger jig to use as a fidget toy or training aid. All of the other jigs I've found are junk. This one works great, so I figured I'd share.

The parts you will need are self explanatory. See misc. notes below for tips.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25-100%
Filament brand:
PLA+
Filament color:
Any
Filament material:
PLA+
Notes:
Use two large support blockers to avoid supports in the holes as shown in the picture, Otherwise you'll spend a long time removing supports or break the model.

I use 40% support density with 50% floor and roof density. 70° support overhang angle.

Be Very careful when tightening the grip. Preferably use a 1/4*28 tap in the hole before attaching the grip. If not, tighten very slowly and back out every 1/2 turn if it seems too tight. This model is prone to cracking if you force it.

In addition to the standard parts, I found that gluing a small piece of rubber on the front will absorb the shock without damaging anything. See picture for reference.