Ender 3 Pro Y轴限位开关支架
Ender 3 Pro Y Axis Limit Switch Spacer
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Shockingly there are no solutions specifically for the ender 3 pro when utilizing a damper on the Y axis motor. For some reason it seems that this model printer utilized a different mounting solution for the Y-Axis limit switch. Therefore, I designed one myself! Super simple and gets the job done. Will need to get a couple of generic M3 screws (typically found on hobby grade RC cars) at about a 10mm length. You will also need to reduce your print bed via your slicer settings by around 7mm as well.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:Doesn't Matter
- Supports:No
- Resolution:.1
- Infill:100%
- Notes:
Any material should be sufficient but stronger the better
License
Ender 3 Pro Y Axis Limit Switch Spacer
by samuel6316 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
Cali Cat: 加州校准猫2023-03-26 -
哈恩链枪兼容款：FatFuck版，绝绝子！2023-04-07 -
5英寸照片框支架2023-06-03 -
藏身载具：VKB战斗者装备2024-03-18 -
咖啡杯 3D模型2024-04-15
最热下载
-
未识别十字架006A，可嵌入盒（v2）2023-03-26 -
Toyota 22RE发动机扩展套件2023-03-26 -
生态FLOW EcoFlow Wave 2风扇系列,EcoFlow Wave 2通风口2024-02-05 -
Wolf系列手机支架2025-07-16 -
远投笼2024-04-06
最新模型
-
艺术雕像（女性）2025-07-16 -
盖子和汽油喷嘴2024-05-08 -
简易蘑菇模型2024-05-08 -
伊比休鸽子鸨夫2024-05-08 -
支撑结构盖板与延伸部分2024-05-06