微型AA罐头喷泉（带盖子，容量低于10立方厘米）

Mini AA Dispenser (Comes with Lid + Under 10cm³ )

2024-03-25 15:52:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A smaller version, which can be printed within 10cm³ (the dispenser on it's own, without the lid), the lid is 100% optional, but I'd print it, just for the looks.

Put the batteries inside the dispenser- there is no need to be neat, as long as they are in the right direction. (I wonder how it goes!)
You can put quite a few in there and only like 3 or 4 less than the other dispenser, which still gives room for many batteries.

Print Settings

Printer:
Tina2
Rafts:
Yes
Supports:
Yes
Resolution:
Does not matter.
Infill:
5%
Filament brand:
Literally any...
Filament color:
Any
Filament material:
Any that is hard (PLA, ABS, PLA+, etc)
Notes:
Only use supports on the dispenser. No need for them on the lid, as you can print it upside down so that there isn't any need for a lid.