ESP32 无螺丝封装

ESP32 Screwless Enlosure

2024-03-25 23:50:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This ESP32 DevKit enclosure encloses the entire board including the pins. Built in stand-off's ensure the board cannot move once enclosed. The lid clips on securely but can be opened easily.

I'm using these to locate a few ESP32 boards around my house as part of an ESPresense sensor set with Home Assistant. I therefore do not need access to the pins, but also do not want to cut them off nor desolder them in case I want to repurpose them later.

I have included parameterisation of the light guides. I have 5mm Perspex/plexiglass rods I use for lightguides. The included OpenScad file allows for parameterisation to customise this.