九针真空管焊接工具和针对准工具

9-Pin Vacuum Tube Pin Straightener and Pin Alignment Tool

2024-03-26 05:07:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

9-Pin Tube Pin Straightener and Pin Alignment Tool.
"A" logo on the back is for www.AustinMics.com, where I design DIY tube amplifiers and kits... and use this tool every time!
Print slow (20mm/s) for best resolution.
The pin holes are a tight fit for USA and other quality 9-pin "nonal" tubes (valves) with rigid pins. Your experience may vary with modern, cheap import tubes and their soft-metal pins.
Occasionally, individual pin holes can sometimes be too small due to imperfections in the print.
This straightener does not remove "kinks" from severely bent pins.
The tool re-aligns to vertical, and corrects the spacing on pins that have been bent or twisted due to rough removal or improper storage.
For best results, insert and remove the tube several times, forcing the glass base to touch the plastic.
BE CAREFUL - You can still break-off or bend pins with this tool.