真空管套接器 - 男性型（适用于cen-tec快速点击系统）
Vacuum hose adapter - male (fits cen-tec quick click)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Male vacuum hose adapter with retaining ring (attaches to bare hose), fits cen-tec systems vacuum hoses. Useful if you plan to cut down the hose into smaller lengths. The model is similar to the original - only changes are to enable printing without supports (chamfers).
Print using ABS+ (or similar material) with no supports, remove the fins within the collet post-print (they should come off very easily).
Tolerances are pretty tight so if you have fitment issues you may need to sand a bit. If you have trouble with overhangs you may need to tune your print settings.
Print Settings
- Printer:
Voron 2.4r2
- Rafts:No
- Supports:No
- Resolution:0.2mm
- Infill:20%
- Filament brand:
eSun
- Filament color:
Gray
- Filament material:
ABS+
License
Vacuum hose adapter - male (fits cen-tec quick click)
by gdewald is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
热门推荐
-
缎帘雪花2023-03-26 -
Z Fold 4 摄像头边框2023-08-07 -
高普瑞奥拉凯塔3D模型2024-01-06 -
微USB转换为标准USB 3D模型2024-02-04 -
Ender-3电源下部支架2024-04-22
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Toyota 22RE发动机扩展套件2023-03-26 -
Daft Punk Thomas 3D打印可穿戴头盔2023-03-26 -
二十面体骰子模型2024-03-29
最新模型
-
NASA链甲接头2024-05-08 -
3.5寸硬盘驱动器到四个2.5寸硬盘驱动器适配器（Nox Hummer Spark）2024-05-08 -
骰子镇的金矿石2024-05-08 -
野马Mach 1雾灯支架模型2024-05-08 -
福克斯尘埃清扫密封压紧装置，36毫米直径2024-05-06