金属轴大容量加载器改装

Bulk Loader Metal Spindle Modification

2024-03-26 05:21:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remix/Modification of the Bulk Film Spooler by nevillefrancismorris. The design he had included a spindle to hold the film roll that was too thick for Ilford bulk rolls. So, I decided to non-destructively modify his designs to include a thinner and metal spindle much like commercial bulk loaders.

NEEDED PARTS:
1- 2inch by 1/4 inch bolt. I got mine here: https://www.amazon.com/gp/product/B07QDTM6F3/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

1- 1/4 x 20 pitch threaded heat inserts. I had some lying around for doing other photography stuff since this thread is the same as tripod threading:
https://www.amazon.com/dp/B07LBR4J6B?psc=1&ref=ppx_yo2ov_dt_b_product_details

Some superglue

INSTRUCTIONS:
Simply insert the bolt through the screw cap, and screw it into the thread on the bulk loader. I used some superglue to secure it down to prevent the bolt from wiggling further.

For the modified bulk loader cap, place the knurled insert slightly into the open hole, and using a soldering iron press it into the hole, making sure it sits flush with the rim. You can also press fit it in with some force, and use superglue to secure it down.