5千克滤线支架

5KG Filament Spool Holder

2024-03-27 00:31:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a design I came up with to hold the large Polymaker 5KG plastic spools as I use these quite often and needed a way to pull filament from them next to my printers. The design requires x2 6001Z bearings to work. A plastic printed bearing could be used and should last a while if you don't want to buy real bearings. But considering the weight of the spool it really works best with real ball bearings. I also have a 1 and 3KG version of this same stand it just needs shorter cross braces which is on another page. They both utilize the same parts except the cross braces are longer for the 5KG and shorter for the 1 and 3KG. I made this as compact as possible so it's not much bigger than the spool itself. As usual, if you have any questions feel free to send me a message or comment here and I'll get back to you as soon as I can. Enjoy!

Parts recommended but not required:
X2 6001Z Ball Bearings
X4 M3x12mm Socket head cap screws and nuts (to hold the crossbraces to the uprights) but you could also opt to superglue these and forgo the screws and nuts
X4 M3x4mm Heated Inserts (to hold the bearing caps on)
X4 M3x16mm Socket head cap screws (also to hold the bearing caps on)