中等大小的16段显示器

Medium 16 Segment Display

2024-03-27 01:44:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This 16 Segment Display has 16 2x3x4 mm square LED's and no Decimal Point.

I did allow tolerances for fitting, however depending on your Printer you may need to adjust the temp accordingly if parts fit two tight print them a bit cooler. it will make a huge difference.

Base can be printed out with any color you like
pore resin or epoxy in the back to make them water tight, indoor / outdoor.
Segments were printed with translucent Red with Red LED's

The Display is NOT PCB compliant.
can be driven by 2 X 74HC595 shift registers per Digit.
The PCB can be Daisy Chained to create larger display arrays
Operating Voltage for the display is 5v.

Parts:
2 x 74HC595
2 x 2 pin Multilayer Ceramic Capacitors 'A5E104M'
16 x 2x3x4 mm squar LED's
16 x 470ohm resistors
32 x Male Headder Pins
Wrapping Wire was used for the connections 'AWG30'