12V电池插座模块

12V Battery Plug Block

2024-03-27 05:07:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I use the sealed lead-acid 12V batteries (the type used in UPS, Trailcams, etc) to power various portable devices. If you know what they are, you understand that the terminals are dangerously exposed, risking a hazardous short-circuit!

To solve this, I have created the 12V Battery Plug Block! It not only covers the terminals to prevent the risk of short, it gives a solid lock feel so you can be confident that good connection is made between the terminals and your spade connectors!

I designed this for use with the "blue" spade terminals which are readily available at hardware stores, auto stores, Walmart, etc. Simply crimp your spade terminals to the wires and pull the terminal into position inside the Plug Block (see photos for more detail). A couple drops of glue will ensure your spade connectors stay put inside the Plug Block even when you unplug the battery.

The side tabs of the Plug Block fit snugly over the edges of your battery. Once the Plug Block is completed, simply slide it forward toward the battery terminals. Press Plug Block firmly onto terminals to ensure a good connection. You should feel it sort of "click" into place.

Prints in about 3 hours at 50% infill. Use a good layer height setting of .16mm or less. Make sure to print with the spade terminal holes facing up! This way you won't need any supports.

Once finished, you can relax, confident that your battery terminals are safe from shorts!