蹦极发条装置

Bungee Spool

2024-03-27 23:23:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Its a spool for a bungee cord or bungee cords for your helmet it goes on top with a Velcro strip and restrains your NVGS from falling due to mount malfunction and other issue of the sorts but yeah glue the cord to the wall of the separate part attach them and through the little hole put a screw with a large head s it doesn't fly off but spins specifically a thin screw and a large head for the screw and i will spin freely however it should have some friction but more of less friction so it rubs and doesn't just let loose

How I Designed This

Design

its a spool that holds your bungee cords so you can quickly loosen and tighten the cords once you've got the respected spot tighten the screw on top until theirs no movements but if you do not want to fully down just in case leave i a little loose. I do NOT recommend this for real NVGS more of digital DIY NVS which are lighter than the real things they work better on this spool keep mind of getting your NVGS on the mount correctly if you cant print this if you can not do this (Get your NODS in the correct position on the mount by pushing down then next step do this press the button on the front of your mount back and really push until it wont go back anymore and once you d that simply push your NV onto the mount and once done you should hear a click if you do not continue this cycle until gotten correct) Hope this helped!

蹦极发条装置

朋友，你觉得上面这个模型，属于下面的哪个分类？