艾利克拉夫 KH1 电源开关保护装置
Elecraft KH1 Power Switch Guard
2024-03-28 05:17:06
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
When using the soft case included with the Edgewood package, I found that my KH1 was switching itself on more often than not. The power switch is extremely recessed but the travel is so short for off/on, the slightest friction on the soft case was turning the radio on and on many occasions I would find the battery completely depleted. Nothing worse than hiking 5 miles up to a summit only to find a dead battery! So I whipped this little fix up in about 30 mins. Nothing fancy and feel free to improve upon it! Hope it helps someone that might experience the same issue. 73! N4SAA
Print Settings
- Printer brand:
Bambu Lab
- Printer:
A1
- Rafts:No
- Supports:No
- Resolution:2
- Infill:15
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
达夫朋克风格的3D头盔——托马斯·班加特勒之作2023-03-27 -
uTracer 62024-03-27 -
无图标 H1 - Heltec V3 外壳2024-04-15 -
乒乓球无气2024-04-22 -
可逆式汽车杯托2024-04-28
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
奥迪康 Gun4IR 侧边按钮触发模块2023-05-23 -
拒绝的手势2024-04-19 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
一体打印活动关节熊猫和支架2025-07-25 -
高跟鞋鞋架2025-07-17 -
系带3D凉鞋（儿童款）2025-07-16 -
Yeezy Foam Runner Adidas运动鞋2025-07-16 -
私密羞羞娱乐骰子2025-07-15