Speakeasy Arms .380 ACP 单排杂志架挂钩
Speakeasy Arms .380 ACP Single Stack Magazine Hanger
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Holds 4 single stack .380 acp magazines
Needed a place to store spare loaded mags, so drew this up super quickly. Designed it around the base plate angle on a s&w Bodyguard .380 so it fits a Bodyguard flawlessly, however does also fit single stack .380 Bersa mags and Ruger LCP single stack mags.
Will probably fit most other single stack .380 mags as well. it is guaranteed to fit these four single stack mags though:
-S&W Bodyguard .380
-Bersa Single Stack .380
-Ruger LCP .380
-Ruger LCP 2 .380
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:No
- Supports:No
- Resolution:0.1
- Infill:15%
- Filament brand:
any
- Filament color:
any
- Filament material:
PLA Or any hard material
- Notes:
Print with bottom against build plate supports are not needed. use a brim as you feel necessary, personally i print without one. 15% infill with at least 3 walls. More infill will make it stronger if you're putting "extended" mags in it (10+ round mags), but for 10 round or less mags 15% should be enough.
Tags
联系我们
热门推荐
-
压缩袋真空适配器2023-03-27 -
Raspberry Pi外壳2023-03-27 -
SnapMaker J1驾驶舱扩展3D模型2023-04-05 -
Na Miata 240SX 原厂经典车型 + 后灯装饰插件2023-05-10
最热下载
-
MK47 模组道具枪2023-03-26 -
Extra 330LX型RC飞机翼固定架（Multiplex）2023-05-23 -
斯坦利杯2024-01-11 -
佳能EOS镜头连接接口2024-01-11 -
硫化机模型2024-04-13
最新模型
-
弹弓HGX-FRAME V1A2025-07-18 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
高跟鞋鞋架2025-07-17 -
女式凉鞋2025-07-16
