ST200F 破碎盖子底板

ST200F Bottom plate for broken cover

2024-03-28 22:14:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hello! Sorry for the low photo quality since my phone is not capable of making anything better.

This is a baseplate for Samsung ST200F camera. I made it because the battery cover lock on mine broke, and it was constantly open (Taping it up made it sticky and ugly). So I made this little thing!

I used SBS (Watson) to print, but it should work with almost anything. After all, it just has to be sturdy. Some filing and/or cutting might be required since mine fits snuggly, but your mileage may vary.

Any screw will do, but I decided to go full-3D-print on it, so I used the screw made by MacNeill. Here is the link!
https://www.thingiverse.com/thing:4515389

Print Settings

Printer brand:
Two Trees
Printer:
Two Trees Bluer
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
60
Filament brand:
Watson/Any
Filament color:
Any
Filament material:
SBS/Any
Notes:
Any filament will do

Post-Printing

Filing/Shaping

You may want to make some room for the camera to fit better, since settings and printers may differ. I suggest cutting away on the shorter stub along the inner line (that's what I did)