盐之破坏者 / 夜班杂志装载托盘

Bug a Salt Shred-er/Vigilante Magazine Reloading Tray

2024-03-29 04:51:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This takes the single disc salt reload helper and turns it into a tray that holds four such things, but also contains your salt mess and lets you reload more than one at a time.

Print in whatever material you want, it's not picky!

Per japhillips comments on his original thing, "Simply snap it onto the back of the pellet clip, fill with salt (I use a blend of 4:1 salt to cornstarch), and then add one drop of water to each chamber. Set it aside, let it dry, and then you are good to go."

Except here you can just press the magazines down onto the tray tabs. I used straight salt, then a tiny medicine syringe from my puppy to carefully drop a 1 or 2 drops of water onto the salt. Let dry and rub off excess.

Go kill some bugs!

Print Settings

Printer brand:
Sovol
Printer:
SV07
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.20-.24
Infill:
15-25%
Filament brand:
Any
Filament color:
Any
Filament material:
PLA
Notes:
I sliced this in Orcaslicer, 3 walls and 15% cubic infill at 0.20 layer height. I do 3 bottom and 5 top layers, but you do you. I did add mouse ear brims but depending on your bed adhesion, may not be needed. Printed in 90 mins at 100-120mm/s.