双管眼镜太阳过滤器DIY套装 60mm / 日食观测

Binocular Solar Filter DIY Kit 60mm / Solar Eclipse

2024-03-29 05:19:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Binocular Solar Filter DIY Kit 60mm

Filter case inner diameter is 60mm. It is a set for you to prepare solar filters for smaller binoculars. Print stl files and you need for 6pc m4x10mm bolts and should only have a solar filter.
If you want print the m4 bolt case (print_with_tpu).stl file with tpu in the zip file. It will be attached to the end of the bolt to prevent damage to the binocular.

You need to make two of this print. Because for two objektive of your binocular.

I can make different sizes for your telescope, camera lens and binoculars.
Different versions are available in my other listings.
You can choose the appropriate version according to the objective diameter of the binoculars.

Glue the solar film you will use between two filter rings. Then glue it to the main body. Be careful to stick it sufficiently with a strong adhesive.

if you want to support
https://www.etsy.com/listing/1689678882/binocular-solar-filter-diy-kit-60mm