手枪护具适配器

Pistol Holster Adapter

2024-03-29 07:56:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

So I came across this interesting holster on Alixpress (I'm sure it's a knock-off give it was $12). Regardless, it uses an adapter that you attach to pistol rails and then that adapter slides into the holster and the gun is held in place with the trigger covered in an open carry type configuration. Given I am a lefty, this seemed like a good option to use some of my other pistols without spending a fortune on custom kydex.

Unfortunately, it only came with one adapter (shown on the gun with the red trigger) and that adapter seems to only fits G17s or other pistols with longer rails. So I made a shorter one (seen on the black pistol).

Seems to fit ok and is held in place with a bolt/nut. Might try scaling up a couple percentage point to make it snugger on the next print.

It has a second rail in the event you want to add a light - see my ridiculous example.