飞行模拟转向协调员

Turn coordinator for flight simulator

2024-03-29 19:05:42

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a replica of a turn coordinator as can be found in nearly all general aviation aircrafts.

It is designed to be used with two servo-motors (SG90 like)
The PDF is the background to be printed and glued to the front plane.

I will use it with an Arduino Uno. I plan on using it for DCS World through the use of DCS Bios.

To assemble the different parts you will need 4 M3 screws (M3x10mm), 4 spacers (M3x30 mm) and four M3 nuts to attach the front face to the motor support. The servo-motors are attached using the M2 screws that came with them. You will also need a M2.5 screw to attach the ball (M2.5x5 mm) to the upper servo and one M2.5x20mm screw and two nuts to attach the aircraft to the second, lower, servo. The two nuts are used one against the other to block in the correct position the aircraft silhouette.