Cordless screwdriver drill toy
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Cordless screwdriver toy, based on popular servo "Tower Pro SG90 micro servo 9g".
Two housing to choose from.
Hack SG90 servo for continuous rotation: https://www.instructables.com/Tower-Pro-SG-90-Micro-Servo-Hack/
Uses magnets as a coupling.
Magnets must be glued to "servo_rod" and "rod1" parts.
May require some sanding.
Included .skp file for modifications.
Requires:
1 x Li-ion / li-po battery 150-500mah or similar
1 x TP4065 charging board
1 x SG90 micro servo 9g
1 x Tact switch 12x12x16 or similar. Spring is recommended but not necessary.
1 x White led
1 x 150 ohm resistor
2 x Neodymium magnets (round ones, 10x1mm or similar)
- Superglue
- Some small screws about 8mm long
- Thin Wires
Print Settings
- Printer:
Twotrees Tornado
- Rafts:Yes
- Supports:Doesn't Matter
- Resolution:1
- Infill:30
- Filament brand:
Noname
- Filament material:
PETG and PLA
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
车身RC 1/102023-03-26 -
摇杆开关固定架 - 丰田RAV4 1994-2000 (XA10)2024-01-09 -
Ender 3 SE V3摄像架2024-03-14 -
MOTU: 永恒之战 - 车辆大集合2024-03-27 -
ICTA D20毫米电气导线出口板2024-05-03
最热下载
-
SpaceX星舰S20/B4 3D模型2025-07-15 -
Nissan S13 Silvia BN 运动装备套件 RC车身 1:10 3件2023-08-23 -
伊瑟宁加德骰子塔（奥斯坦克）2025-07-16 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
FFBeast仿真飞行器模拟轮部件2024-04-19
最新模型
-
失落的索罗恩斯2024-05-08 -
尼琳替换式烤架2024-05-08 -
母亲节墙面艺术2024-05-08 -
LTT短小块存储2024-05-08 -
Makita DDF484钻孔架 / 钻孔机支撑架2024-05-06