PLANO枪支维护箱夹持架

PLANO Gun Maintenance Box Yoke Holder

2024-03-29 23:37:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Description

This model is an attachment for a PLANO Gun box "Shooter's Extra Large Case"
https://www.planooutdoors.com/shooters-extra-large-case-1595451

It is a "permanently" bolt-mounted outside holder for the 2 gun yokes that comes with the box.
The two large yokes no longer needs to be stored inside the box or away from the box.
The holders allows the 2 gun yokes being mounted outside the box all the time when not used.
The box lid can easily open and close with the yokes still mounted on the outside.

These are the parts needed to be printed:

2 x "Yoke Holder"
1 x "Drill Jig"

4 pcs of 25-30mm M6 bolts with nuts also needed.

Assembly

I really recommend using the drill jig. The largest yoke is only 8mm smaller than the height of the box.
When using the drill jig, the yokes will neither touch the ground nor protrude up above the box top.
Place the box on the jig legs and drill with a 6mm drill bit.