XR30 G6/G5 Ecotech Radion Light Shade

2024-03-30 01:33:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remix of the remix by @percula

I liked this design with the angled sides, because this minimizes the lightloss. The thing I changed was that I wanted the back wall, for less light spill. Also I made it 5mm taller to further reduce the lightspill to where I sit. Then I made the wall of the angled part a bit smaller because this is not really necessary and reduces the (long) print time.

With Cura slicer this print would take over 20h, but with Orca Slicer I reduced the print time to 13h.

I also printed this in Sunlu PLA+ because my previous lights (Redsea ReefLed160) had a shade with the same material for 2 years and never deformed.