Labyrinth迷宫礼盒（花瓶模式）- 盖面深刻纹饰 - 混搭版

Labyrinth gift box (VASE MODE) - Lid deeper notch - Remix

2024-03-31 08:17:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is just a copy of original LID_vase_mode_deeper_notch.stl, but STEP file uploaded.
As a result, you can print it with better resolution (if your printer allows it).

See comparison on photos -- original on the left, new one (with better resolution specified in slicer) -- on the right.
I printed it on the same printer with the same filament and the same OrcaSlicer settings (other then "Resolution" and "Slice gap closing radius").

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
0
Filament brand:
Sunlu
Filament color:
Transparent
Filament material:
PLA
Notes:
- Spiral vase mode, so walls - 1, top layers - 0, infil - 0;
- Temperatures: 210/60 (first layer 215/65);
- Speed: ~25mm/s;
- Bottom: 4 layers;
- Layer height: 0.2mm;
- Line width: 0.6mm line width (with my 0.4mm nozzle);
- Slice gap closing radius 0.012 (reduced from slicer default 0.049);
- Resolution: 0.002 (reduced from slicer default 0.012).