Logitech极端3D Pro 桌面支架适配器，用于Thrust Master 桌面夹具

Logitech Extreme 3D Pro Desk Mount Adapter for Thrust Master Desk Clamp

2024-04-01 02:13:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Logitech极端3D Pro 桌面支架适配器，用于Thrust Master 桌面夹具

Summary

This model is COMPLETE as of right now, everything fits as it should, however due to the thrustmaster mount having a failure just as it was going to finish I have no photos of the true fitment onto my desk until Tomorrow. Till then I will be posting updates and changes if need to be made.

Printed in Inland Mint Green PLA

Ender3

.6mm nozzle

Standard quality

10 percent gyroid infill

You will need good bed adhesion (I used some hairspray for insurance even if i have a textured PEI sheet)

Materials needed:

Zip Ties what I will be using since I know there is room for improvement or Access to hardware

Patience…

The mounting bracket is meant to be a TIGHT fit so that you don't pull it off the base while pulling Top Gun maneuvers.

As far as the desk mount I tested fit on my CAD software and it does seem to be all correct, update photos on full mounting coming Tomorrow. If you do make this model please leave extensive feedback so I may help you!!

Printables Link: https://www.printables.com/model/823789-logitech-extreme-3d-pro-desk-mount-bracket-for-thr

Thrustmaster desk clamp: https://www.printables.com/model/628266-t16000m-accessories