DJI 遥控器遮挡罩 RC-N1 配件适用于 Mini 2 / Mini 3 Pro / Air 2S / Mavic Air 2（含支架）

DJI RC-N1 Remote shade Mini 2 / Mini 3 Pro / Air 2S / Mavic Air 2 with hinges

2023-03-26 19:20:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

DJI 遥控器遮挡罩 RC-N1 配件适用于 Mini 2 / Mini 3 Pro / Air 2S / Mavic Air 2（含支架）

Just another shade for DJI RC-N1 Remote that comes with Mini 2, Mini 3 Pro (not the RC Pro Smart Remote one), Mavic Air 2, Air 2S. Folds up and fits into original DJI bag with Mini 2

This is a remix from user 'ACDanyC82', but built from ground up in SolidWORKS with different hinges as I had problems there.
nTested with iPhone 7 Plus (+skin cover cca.160mm overall), but can be made larger as SW model is parametric. Write me in the comment and hopefully I will see it.

Only supports I needed were under the handles/forks (that holds around the Ring) on Center part. Holes were printed without supports, as they are only 2mm and support will clog them up.
nIf printer clogs 2mm holes up during the printing, you can heat up the needle with a lighter and fix it. Hold the needle with tweezers ofc.

Print time at 0,2mm layer with Prusa Mini+ is around 4-5h.

NOTE: Hinges need a few centimeters of 1,75mm filament, chopped on 4 pieces.

DJI 遥控器遮挡罩 RC-N1 配件适用于 Mini 2 / Mini 3 Pro / Air 2S / Mavic Air 2（含支架）

朋友，你觉得上面这个模型，属于下面的哪个分类？