Keter Factor 88 花园小屋塑料房子挂钩配件

Keter Factor 88 Hinges Spare Part for Garden Shed Plastic House

2024-04-01 23:12:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

You can print in PLA, but it's quite rigid and brittle, moreover, in summer with the heat the PLA will become soft. I printed it in black for testing, and in WHITE PETG as final.
In Cura for PETG printing, here are the parameters for an alphawise:
235d
board: 75d
Speed 30 and base speed 20
No fan for 4 layers then 100pc
gyroid support
distance Z of the supports / lower distance and upper distance: 0.25
X/Y distance from supports: 0.7
enable up and down support
you have to use a large raft, otherwise the petg comes off, even at 70d
extra margin of raft 20
raft print speed 40

Anyone who has a better quality printer will be able to print in ABS ;-)