蓝色玻璃 Azul 3D模型

Azul game

2024-04-02 00:23:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The full game "Azul", with the board, tiles, score markers and the starter player marker.

The tiles are very simple, you just need to print them in different colors. The files include the "color spot", that you will need to glue in the wall section of the board to mark which color goes where.

To make the factories I used https://www.thingiverse.com/thing:4201414. Just downsize it to 50% and remove about 50% of the top walls.

Print Settings

Notes:
You should print the board with a color change at around 1.3mm, to make the board numbers easier to read.

The game is meant to be played between 2-4 player, so you will need:
- 4 X Boards
- 1 X "Token - First". (token used to show who is the first player to pick each turn)
- 8 X Score marker. The files include 2 different versions, choose which one you like the most. There is a photo uploaded showing each version.
- 20 X Token of each color. The game uses 5 different colors, so you will need a total of a 100 token.
- 20 X "Color spot" of each color. You will need 5 for each player board's wall.
- Glue
Recommended: make the 20 tokens and 20 color spot of each color on a single print. You will have to print it, change color and repeat.