Bloop Bin-End3 S1（纤维交换桶）

Bloop Bin ender 3 s1 (filament swap bucket)

2024-04-02 00:37:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Make sure to clean out the piece that connects to the printer thoroughly before attaching it. Not doing so can lead to the part not sitting properly making it difficult to screw in. I'm still making different versions but this one is complete for now you will just have to make your own code for it. THIS SHOULD FIT ALL MODELS OF THE ENDER 3 S1 EXCLUDING THE PLUS(IF THIS DOESNT FIT THE REGULAR ENDER 3 S1 LEAVE A COMMENT). YOUR SCREEN IF USED WILL EITHER HAVE TO BE DELETED OR REPOSITIONED SOMEWHERE ELSE.

Print Settings

Supports:
Yes
Resolution:
.16
Infill:
30
Filament brand:
Elegoo
Filament material:
petg
Notes:
I orientated the print standing with the bottom flat against the printer. Ive printed this at 10% infill and it did fine I liked the rigidity of 30% though.

Bloop Bin-End3 S1（纤维交换桶）

朋友，你觉得上面这个模型，属于下面的哪个分类？