KLP1 WobbleX 模块 - 解决 Z 轴晃动问题

KLP1 WobbleX Module - Fix Z wobble

2024-04-02 03:27:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Your KLP1 has an ugly Z wobble? This is caused by the Z screws not being aligned and is very difficult to adjust on this machine.

Welcome to the ultimate solution, wobbleX. The prerequisite for using this printable part is that you have purchased the wobbleX WS8 version and have two extra M3X30 screws and four M3 heat inserts (M3X6X5 same as voron use).

!! The part witch has heat insert is screwed with hot bed. !!

Hats off to the developers of wobbleX for making 3D printing one step closer to people's lives.
The original developer page is here: https://github.com/MirageC79/Interfaces-for-WobbleX-integration