Creality Nebula摄像头支架（适用于Endecker 3 S1 Plus X轴）
Creality Nebula Camera Mount for the Ender 3 S1 Plus on the X Axis
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I loved the original design by Janb as it enables the camera to follow the print as it builds and is not obstructed by the bed. I found that the size of the camera, and the clip of the original version of the X-Axis was a little weak. So all I have done is extrude the bracket to the size of the camera's base and then added the bracket mount from @NS1PRO_1722488 in Fusion 360.
The camera will neatly slide into the box and remain firmly fixed, then away you go. Simples.
When it comes to printing the model should be in the correct orientation for it to print with no support necessary.
I printed it with eSuns Matt Black PLA+ Filament with these settings:
Prusaslicer High Detail Setting for my PLA+
Nozzle: 0.2mm
3 walls
4 top/bottom layers
15% Cubic infill
Weight: 39 g
Est. Cost £0.79
Time 3hrs 4 Mins
Added various file formats in case anyone wants to modify it.
STL, STEP, f3d, 3mf
f3d: Fusion 360
3mf:
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
This is Fine, 狗的重制版2025-06-24 -
微缩版电脑桌2023-03-26 -
安装电缆固定装置2023-05-09 -
业余无线电爱好者 - 线绕装置 / EFHW 统计装置2024-04-10 -
Neptune 4 / 4 Pro 的 Cura 切片配置与打印建议2024-05-02
最热下载
-
开源 1:10 四驱竞技型 RC 车2025-07-08 -
MK47 模组道具枪2023-03-26 -
替换式膨胀喷嘴，适用于FLEXTAILGEAR小型泵。2024-03-18 -
Neptune 4 / 4 Pro 的 Cura 切片配置与打印建议2024-05-02
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21
最新模型
-
Moulinex 多核处理器2024-05-08 -
苹果专业版音响格栅2024-05-06 -
茶几腿2024-05-06 -
镀铬保险杠防护罩套件适用于大众汽车2024-05-06 -
智能座椅滑动设计2024-05-06