3D合成催化剂模拟4000
SynthCat 4000
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Is it a synth, is it a cat... It's a SynthCat 4000!
You can find a video of this beastie here: https://youtu.be/AViN59aRU58?si=wULrvJ-bv8XBa1NO
This is a super basic little project based electronically and lets face it physically on an Arduino UNO. Print out a few parts, hook up the 2 pots and audio plug, upload the code and you're good to go.
Two basic controls: the head controls the frequency and the tail controls the modulation.
You can find full instructions on how to build SynthCat 4000 here: https://www.instructables.com/The-SynthCat-4000/
Print Settings
- Printer brand:
FlashForge
- Printer:
Guider II
- Rafts:No
- Supports:Yes
- Notes:
I printed all at once and only used supports for then head and tail connector. Didn't need raft but you could use a brim if you have trouble.
License
SynthCat 4000
by grandtippler is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
户外单元安装3D模型2023-03-26 -
全能3D打印机测试2023-03-26 -
科罗拉多矿业学院2023-05-08 -
车轮氧化模拟工具 for RR-Wheels2023-08-20 -
珍珠细装12号2024-03-13
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
GPD Win3 把手型号2023-04-07 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
Logitech G604鼠标扫描数据与橡胶替换2024-04-08
最新模型
-
任意立方体活动关节的一体打印外星人2025-07-19 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16 -
一体打印行星齿轮2025-07-15 -
坏龙家的大宝贝女生别下2025-06-26