双层结构合成器支架

Two Tier Synth Stand

2024-04-05 20:17:20

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a two tier synth stand for behringer crave dimension synths as crave, edge or the upcoming spice.

I created this as a three-parts-per-side design so it fits the printing bed of my reality ender 3 v2 neo.

The parts fit loosely together through the dove tails. Once they are screwed tightly to the synths' housings, they hold each other sufficiently stabile for studio use.

It's a bit fiddly though. First you screw left and right parts 1 loosely to the lower synth. Than you fit parts 2 into the dove tail casings of parts 1. Now you screw them tightly. Than you screw parts 3 to the upper synth tightly. Now you lath parts 3 into parts 2.

You could also glue it all together if you want, but I think you really don't need to.

I would very much like to see some pics of your prints here and maybe some links to the music you make with your crave-edge-combos.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V2 Neo
Supports:
Yes
Infill:
20%
Filament brand:
creality
Filament material:
PLA
Notes:
There are some small overhangs through to the dove tails and dove tails housings, so I printed the parts with tree supports.