4英寸内径到3英寸外径柔性管道适配器
4in (ID) to 3in (OD) Flex Duct Adapter
2024-04-02 08:13:52
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Designed to use existing 3in flex duct with a new 4in bathroom fan. This isn't recommended, but I did it anyway. Loosely fits over a 4in exhaust port on a bathroom fan, I used tape to hold and seal.
If I did it again I would reduce the 3in side to 25mm length instead of 50mm.
Print Settings
- Notes:
I used 3 perimeters for a solid object ~3hrs at default settings on Longer LK5 (Similar to an Ender 3)
Printed small-side down, did not require supports. If supports were used I'd want to print small side down so they wouldn't be on mating surface.
License
BSD-2-Clause
4in (ID) to 3in (OD) Flex Duct Adapter
by mcneiljt is licensed under the BSD License license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
迷你旋转式杯子 - 亚马逊电机定制款2023-06-18 -
LG冰箱抽屉滚轮锁 3D模型2023-06-22 -
耳机挂钩2024-03-22 -
兔子卡片模型2024-04-02 -
女式凉鞋2025-07-16
最热下载
-
QC USB充电器外壳（XFW-KC42-4）2024-01-17 -
21700毫安电池单元保持架2024-04-06 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
Neptune 4 / 4 Pro 的 Cura 切片配置与打印建议2024-05-02 -
塑料扣（3D打印无需支撑设计）2024-05-08
最新模型
-
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15 -
青蛙闻牛2024-05-08 -
基础火箭模型2024-05-08 -
叉子与托盘 - 专为Bruda玩具设计2024-05-06 -
无线电删除板2024-05-06