3dsjs

64,000 rpm VEX V5 电机适配器

64,000 rpm vex v5 motor adapter

2024-04-02 23:25:43

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

DISCLAIMER: USE AT YOUR OWN RISK!

Material instructions:
Print the motor shaft adapter and main adapter in ABS for optimal strength, while the motor top should be printed in PLA.

IMPORTANT:
This modification is not compliant with VEX competitions and is solely intended for the novelty of achieving high motor speeds.

How it Works:
In a standard VEX motor, the motor cartridge divides the base output rpm of the white gear before the cartridge. The base output rpm is 3600 rpm, and with a green cartridge (18:1), it divides 3600 by 18, resulting in a 200 rpm output. However, when the cartridge is flipped, instead of dividing, it multiplies. Thus, the same motor with a flipped green motor cartridge theoretically outputs 64,800 rpm.

Theoretical Top Speeds of Each Cartridge:
Blue (6:1) = 21,600 rpm
Green (18:1) = 64,800 rpm
Red (36:1) = 129,600 rpm

Testing:
I conducted testing without an RPM meter, but it appeared that the green cartridge provided the highest speed. The red cartridge lacked sufficient torque to reach high speeds. I have not tested the motors for any practical work; they were only allowed to spin freely. An adapter is included to facilitate the use of an axle from the motor, but its functionality remains untested.

Print Settings

  • Printer brand:

    Flsun

  • Printer:

    Flsun Super Racer

  • Resolution:
    .2
  • Infill:
    100%
  • Filament brand:

    N/A

  • Filament material:

    PLA / ABS

  • Notes:

    Print motor shaft adapter in ABS and print motor top in PLA

64,000 rpm VEX V5 电机适配器
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢