Subaru Sambar车顶灯罩3D模型

Subaru Sambar Dome Light Cover

2024-04-03 01:35:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

My buddy Mike has a 1995 Subaru Sambar Kei mini truck and he broke the dome light cover. He created this model in Tinkercad and I printed it - it works perfectly.

This is a replacement for the Subaru Sambar dome light cover, should fit model years 1990 to 1999 (maybe other years too).

It's a tight fit but snaps in perfectly. To install, hook the top over the dome light plate then snap in the bottom. To remove, push the dome light cover down while pulling the bottom towards you. I would also recommend you replace the dome light bulb with an LED version to increase the brightness, I used this one: www.amazon.com/gp/product/B07GZKJWS1

Print Settings

Printer brand:
AnkerMake
Printer:
AnkerMake M5
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2mm
Infill:
30
Filament brand:
JAREES
Filament color:
Clear
Filament material:
PLA+
Notes:
An 30% grid infill pattern works really well to diffuse the light. You could print it slightly lower to make it less opaque or higher to increase its strength...not that it needs it, 30% seems to work really well.