Micro Swiss NG Ender 5 5015 Fan Shroud

2024-04-03 02:46:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a complete rework of the Micro Swiss NG Shroud, based on hebnern's simplified model.

The reason is simple: I wanted an even distribution of airflow. I am also convinced that a single 5015 is strong enough if the air is properly distributed. So I designed a split inlet for the 5015 fan and also optimized the inner air shafts.

Though I was not able to simulate the airflow with CFD, I have made some classic water tests and at least it looks promising. :)

Print Settings

Printer brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
15%
Filament brand:
Redline
Filament color:
Black
Filament material:
ASA-X
Notes:
I printed the Model with supports on build plate only, in addition I set the overhang threshold angle to 5º, so only the middle area of the shroud is being supported.
All other bridges and overhangs came out just fine without support (may be different for your printer).

Since the outlets are quiet near to the nozzle, I recommend to use ABS or ASA for printing.