Arduino Pro Micro USB-C 保护套 DIYMORE 设计
Arduino Pro Micro Case - USB C - DIYMORE
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a pressure fit case for the Arduino Pro Micro USB C variant from DIYMORE, easily accessible from Amazon or Aliexpress etc.
This is my first dive into CAD software, I would appreciate constructive feedback!
Variants Offered:
Top and Bottom with Cable Hole at Rear (5mm diameter)
Top and Bottom without Cable Hole at Rear
Top with Logo
Top without Logo
At .2mm Quality and 20% infill, total print time is 50 minutes +/-, using est. 6g or 2.17m of filament.
Deburring of the mating extrudes may be helpful to allow for better fitment.
No supports necessary.
Depending of Filament choice, board LEDs will be visible through surfaces.
If not desired, place electrical tape inside of case to reduce transparency.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 S1 Plus
- Rafts:No
- Supports:No
- Resolution:0.2mm
- Infill:20%
- Filament brand:
eSUN
- Filament color:
Matte White
- Filament material:
PLA
Tags
Arduino Pro Micro USB-C 保护套 DIYMORE 设计相关内容
联系我们
热门推荐
-
1954年梅赛德斯-奔驰W196皮诺德比赛车壳体2023-03-26 -
前行者的头盔 - Halo: 无限2023-03-26 -
CR激光猎鹰5W/10W - 电缆固定架2023-05-04 -
Wörthersee 11cm Tester2023-05-13 -
IKEA Skadis 支持 8 端桌面 USB 充电站2024-03-19
最热下载
-
全能3D打印机测试2023-03-26 -
E3D火山喷嘴2023-05-26 -
完全可打印的无人机框架2023-05-31 -
GLOCK 17（第三代）蓝枪2024-04-13 -
GTA 5 大地图模型2024-04-21
最新模型
-
龙珠孙悟空，无需支撑2025-07-19 -
用于HGX Lite的MBOT3D MK2混音版2025-07-18 -
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
鞋带锁2025-07-17 -
苍井空老师全身像苍井空跪姿2025-06-27