Arduino面包板托盘

Arduino Breadboard tray

2024-04-19 05:12:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The purpose of this is to help my students keep their projects organized in my middle school advanced robotics class

The object is 12mm tall and the text is 13mm tall. The number is the tool kit number that the board holder goes with

Print Settings

Printer brand:
MakerBot
Printer:
MakerBot Replicator
Rafts:
Yes
Supports:
No
Notes:
I have some extreme curling problems with this printer, so I printed the bottom and raft slowly with the fan at half the default.

Post-Printing

I used a box cutter to expose the sticker areas on the back of the breadboard. It is then pressed in. I use hot glue to hold the Arduino in.

How I Designed This

I don't remember where I got the original

The one I downloaded had several things I didn't like.
The changes are:
The position of the Arduino was swapped to the left. Now the text is right side up and the parts tray is more accessible to right-handed use. It also works better in my classroom
Cutouts were added to make the breadboard more secure.
The Arduino was lowered, and cutouts were added to access the USB and power port.