Gotek 安装指南：为 Sam Coupe 配置

Gotek install for Sam Coupe

2024-04-03 04:26:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

It is difficult to find white Gotek drives, and I did not like the look of grey Goteks spoiling the look of the Sam Coupe so I created these parts.

Personally, when you can see the Gotek I like to use a '3rd button' rather than Rotary Dial, but I've also included standard 2 button front plate.
You want to make sure the screws are tight for the Gotek Frame otherwise if your USB stick is a tight fit, it could push the frame back.

I would like to give some credit:

to User 'Tom_DD' for creating the Gotek frame which I modified: https://www.thingiverse.com/thing:3387674
to User 'LCD' for creating the drive bay cover. I thickened the front by 1.2mm as it seemed a bit 'see through' on my prints, also I made it slightly wider as there was a gap on my Sam Coupe when I used the downloaded .STL https://www.thingiverse.com/thing:873336