炉具指示器替换兼容奥扎德型号

Stove dial replacement compatible with Ozard stove.

2024-04-03 07:17:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Replacement stove dial

compatible with Ozark stove

I found the oem dials for my ozark stove stuck out way to far and would get caught on everything when storing and moving around the stove, so I designed some slim replacement dials.

For some reason the factory valve stems are flipped from eachother which meant one of the factory dials was upside down when fully closed, so this also corrects that.

There are two different styles

Left and Right dials with text (dual color)
Dial with no text(single color)

Dials with text (dual color): Print one of each, the text is a seperate object and is 0.6mm thick, exactly two layers at 0.3mm layer height. This way you only need to do a few color changes at the begining. I printed the dial black with the text red on my prusa Mk3S.

Dials with no text(Single color: Print either both files or the same file twice. These were designed to fit my Ozark camping stove but may also fit other brands and stoves with the same valve stems so if you give it a shot and it works please post a make so others can know as well!

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
Any
Notes:
The text is 0.6mm thick so the dials were designed to be printed at 0.3mm layer heights to reduce the amount of color changes needed in the begining of the print.

I suggest printing in PETG or better since hot summer temperatures may cause PLA to soften.