Grizzly G1023和G0899剪切保护边位置指示器

Grizzly G1023 & G0899 Rip Fence Position Indicator

2024-02-05 00:38:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I just bought a new Grizzly G0899 table saw which I love except for one thing. The rip fence distance indicator uses a magnifying bubble with a line that is a good 1/4 inch (6mm) away from the scale attached to the fence support bar. It is very difficult to line up the indicator accurately with a measurement without having parallax error. Notice that the last photo shows the original indicator and has a shadow in the photo which would be where the line falls on the tape which is off by a good 1/8" (3mm). This thing solves the parallax problem by placing the indicator line very close to the measurement tape. This thing will fit the G1023 and G0899 line of Grizzly table saws.

I printed my indicator using ABS but PETG should also work. I didn't use PLA because it is more brittle but it should also work. The window is made from a piece of 0.092" Acrylic (2.5mm) with dimensions of 25mm x 25mm. I made the reticle by breaking the tip off a pointed Xacto knife and using a square. I scored the line with the Xacto knife upside down; dragging it multiple times to create a narrow channel. The line should face down towards the table saw when installed in the guide. I taped off the scored channel and filled it with black paint. The window should be glued into place. Be aware that Acrylic clouds when exposed to Super glue type glues so use something else.