进入式老鼠/耗子喂食装置

Walk in rat/mouse feeder

2024-04-03 18:28:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

After discovering some rats in the video of the wildcam I create this "Walk in rat feeder".
Because I had some left-over PVC tube I only needed an end cap. But you can 3d print a full 20-25 cm version if you want. The end cap is perforated but by setting Perforation diameter to zero its fully closed. I use 20-25 cm of PVC tube with a diameter of 80 mm.

The feeder is checked almost every day. The feeder location is changed about every 2 weeks but only when the 'food' is not eaten for some 2-3 days. The food 'smell' is changed by using some peanut butter or cherry jam but always with 'anti rat wheat' on top. Untill today birds seem to ignore this feeder.

If the customizer does not work in the browser then download the scad file and try it in OpenScad.