智能家居助手面板支架（Honor Pad 9）
Home Assistant Smart Home Panel Mount Honor Pad 9
2024-04-03 22:03:35
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I created a wall mount for the Honor Pad 9. Read print settings to guarantee a good fit.
If your printer is large enough you can print:
- top_bracket
- bottom_mount
or otherwise use the pre cut parts:
- top_bracket_cut
- bottom_mount_cut
Honor Pad 9 (Affiliate): Aliexpress
Print Settings
- Printer brand:
Anycubic
- Printer:
Vyper
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:15
- Filament brand:
-
- Filament color:
-
- Filament material:
PLA or PETG
- Notes:
- Use supports on the curvatures and floating segments.
- The mounting holes dont need supports.
- Print on charging port side instead of layed flat. This prevents the need for support in the gap and decreases the chances of the tablet not fitting .
Tags
License
CC BY-NC-SA
Home Assistant Smart Home Panel Mount Honor Pad 9
by lushey is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Guitar Slider and Pick Holder 3D Model2023-04-03 -
星球大战BLASTER站架模型2023-05-02 -
Dr. Dabber XS立体和工具架2023-05-09 -
刀剑守卫：Zenitsu2023-05-13 -
Pen Case 外壳2023-05-14
最热下载
-
全能3D打印机测试2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
GPD Win3 把手型号2023-04-07 -
Apple鼠标 - M0100 3D模型2024-03-25 -
Logitech G604鼠标扫描数据与橡胶替换2024-04-08
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
丰田22RE发动机Starer电机2025-08-08 -
弹弓HGX-FRAME V1A2025-07-18 -
兔女郎半身像2025-07-15 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15