智能家居烟雾报警器与吸尘机接口适配器

Smoke Alarm Vacuum Cleaning Adaptor

2024-05-02 19:18:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

One of our newish smoke alarms went off during the night, and we figured out a little bug or something decided to make a nest inside. I tried compressed air, but couldn't get it out. This adaptor lets me attach a household vacuum to suck out any build up of bugs and dust. There's a space at the end so not too much vacuum builds up inside the device, and I only run it for a second or two. I rotate it 90° and do it from four sides since the inner chambers have all kinds of angles and crevices.

Printed in Matte PLA, 0.2 layer height, speed setting, support on build plate only. I should have added some support to the inner hole as well, my Prusa Mini wasn't able to bridge that ~25mm hole very well.