RS-01 阿约顿·森纳 1993年 McLAREN MP4/8 F1 RC车 3D模型

RS-01 Ayrton Senna’s 1993 McLaren MP4/8 Formula 1 RC Car

2023-03-26 21:44:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

RS-01 阿约顿·森纳 1993年 McLAREN MP4/8 F1 RC车 3D模型

RC车辆模型构建清单

This text appears to be a detailed list of parts and their specifications for building a custom RC car model, likely based on the Tamiya F104 chassis.

Model:

The model seems to be inspired by Ayrton Senna's McLaren Honda MP4/4, 5, or 6 (based on the helmet reference).

Parts List:

Body: Pre-painted F1 driver helmet body.
Lights: Rainlight LED light – Red (F1 Tail Light).
Tires: F104 rubber tires (front and rear). Options for different compounds are mentioned.
Wheels: Tamiya F104 Mesh Wheels for Rubber Tires. Other wheel options are also listed.
Shocks: Specific Tamiya shocks, turnbuckles, and spring recommendations for front and rear suspension.
Rear Axle and Motor Mounts: Tamiya F104 parts (motor mounts, diffuser, aluminum diff housing). Carbon fiber rear shaft is chosen. Other axle options are mentioned.
Steering & Suspension:
- Tamiya wheel stopper.
- 3Racing motor bearing holders.
- Carbon Reinforced Front Uprights.
Bearings: Ball bearings for front wheels.

Electronics:

Servo: Hitec HS-77BB Low Profile Servo.
Battery: Turing nano-tech Shorty 4200mah 2S2P Hardcore Lip Pack or similar size.

Assembly Notes:

Body parts can be screwed together, but epoxy and one screw are recommended for added strength.
Specific parts requiring supports during printing (FDM method likely) are listed.