80mm Element Helix Parallax Wheel
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a snap-on parallax wheel for Element Optics Helix rifle scopes.
It for sure fits the 6-24x50 FFP scope but will probably fit on a lot of other Helix scopes as well.
It is a snug fit that won't come loose without a bit of force.
I notice a little bit of play/backlash when switching direction.
By mistake I printed mine with 15% infill so that might be the cause.
Try 50% infill for a more rigid print.
A change in the design might be able to fully remove the play but this is absolutely good enough for me so I wont spend more time on that unless I get a lot of comments for improvements.
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu P1S
- Rafts:No
- Supports:No
- Resolution:0.20mm layer
- Filament brand:
Bambu Labs
- Filament material:
PLA
Tags
License
80mm Element Helix Parallax Wheel
by tonyal is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
球体机器人（彩蛋版）圣诞装饰品制作工具2023-03-26 -
轴承支撑装置2023-03-27
-
3D模型：Pinça2023-05-07 -
科幻模型工具包2023-05-14 -
HILTI徽章2023-05-19
最热下载
-
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
完全可打印的无人机框架2023-05-31 -
Metabo SXE450 真空连接器（适用于Bosch Advanced VAC20）2024-01-11 -
Logitech G604鼠标扫描数据与橡胶替换2024-04-08 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
鞋撑2025-07-17 -
3d打印的男人凉鞋2025-07-17 -
兔女郎半身像2025-07-15 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24