茶叶碎片清洁器

Tea grounds scraper

2024-04-04 05:19:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is intended to be used to remove remaining tea grounds from cylindrical teapot inserts. The STL file is for containers that are 45mm tall and 70mm in diameter; you can customize it for different sizes by opening the slvs file with solvespace and changing constraints.

It's useful to size the height so that the top of the scraper is just below any protrusions at the top (e.g. locking lugs). I haven't experimented with different "screw pitches"; it's likely that less aggresive ones will do the job better (but will be harder to print due to overhangs; also beware making anything that does at least one full halfrotation: getting the diameter right will become critical then).