Indesit冰箱冻柜门夹门钩

Indesit fridge freezer drawer door catch

2024-04-04 09:50:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A replacement for those small catches on the freezer doors which break off easily.

I used some strong narrow double sided sticky tape (the foamy TESA brand with yellow protective film works well) on the back of the print to firmly attach it to the door. It wants to come out if you don't so this.

Instructions

I printed it with 4 perimeters and 50% infill in PETG. Be aware that PLA might not like the environmental conditions in your freezer, but I haven't tested this.

Instructions

I printed it with 4 perimeters and 50% infill in PETG. Be aware that PLA might not like the environmental conditions in your freezer, but I haven't tested this.