Link的主教之剑

Link's Mastersword

2024-04-04 10:47:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A new version of the cool fidget sword toy. The original design comes from SmileyPrinter.

Now the sword has a cool Mastersword design. I did my best to replicate the design from Legend of Zelda: Tears of the Kingdom. Ive been working on this in one version or another for a rather long time. And im just really happy with the result.

There were some details, especially in the sheath that just wouldnt work when we are talking about such a small toy. I did have to pull in the wings, otherwise they are to weak and tend to break. Similar with the handle itself. The more compact design makes it more durable and less likely for kids to break.

You will need glue and some 6x3 disk magnets to assemble this print.

The sword and the sheath both have groves for the glue and to guide assembly. Just print 2 halves of the blade and 2 halves of the sheath. Apply glue, and they should easily lock together. The hilt just slides onto the tang of the blade with a little glue to hold it in place.

If your printer prints a little large and the parts have some trouble fitting together, a bit of heat from a lighter strategically applied will make them fit together easier.

When glueing in the magnets, be sure to flip the magnets over when inserting into the opposite half of the blade or sheath. The goal is to have the poles on all 12 magnets line up.

Then once everything is glued together, you can slide the blade out and flip it over and now the blade tries to push out of the sheath. This makes for a nice feeling button. Like a big pen.

Soon ill make a Shield to go along with the sword. I may make the shield into a stand alone slider. But even as just a fridge magnet, it will be fun to pop it onto the sheath.

This was built in onshape. You can find a link to the source below.
https://cad.onshape.com/documents/ccf32a6f5a7ec10bf0f635b1/w/151ec6da37eeca02d98d9d31/e/db1be322f2f41891466cf1a7?renderMode=0&uiState=660e1086ebf0197ecb0d3178