触发系统抽汁过滤器驱动齿轮3D模型

Trigger systems sump filter drive gear

2023-08-08 02:01:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is the drive gear that is originally made from acrylic. It drives the roll. The gears can strip off from extra resistance as the sump gets older. Calcium and worm buildup on the lower rollers increases the resistance and thus pressure on the gears as the sump gets older. It is not easy to clean this buildup.......

If you have a broken gear

First. Contact trigger. They will most likely send you replacements for free. It make take a week or two.

Second, try to clean the bottom rollers that the fleece goes around.

Print a gear for use if you need one quickly or can not source one.

I have two models depending on how accurate your calibration is to inner diameter holes. One is tighter and one is looser. Hopefully one will work well. The gear should slide on, but it should not have excessive slop.

Print using the strongest filament you have and use close to 100% fill. I used PETG

You will need to print with supports.