快速窗帘支撑架
Quick Curtain Bar Holder
2024-04-04 18:14:02
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I needed a curtain bar holder that was closer to the walls since I like to use straight curtains to block the light in the morning.
Haven't found one of these anywhere, so I made one. Should hold around 5kg safely.
If it is not obvious, this holder is supposed to hold a 16mm diameter bar with matching endcaps. Mirror the part to get the left side holder. If you have a curtain bar that fits perfectly, you can cover up the holes with 3d printed plug caps.
Print Settings
- Printer brand:
Artillery
- Printer:
Artillery Sidewinder X3 Plus
- Rafts:Doesn't Matter
- Supports:Doesn't Matter
- Resolution:0.2
- Infill:20%
- Filament brand:
Creality
- Filament color:
White
- Filament material:
PLA
Tags
License
CC BY-NC
Quick Curtain Bar Holder
by Rakshasolutions is licensed under the Creative Commons - Attribution - Non-Commercial license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
高级Δ型打印机校准（塔位位置+单独对角线杆）2023-03-26 -
LG冰箱抽屉滚轮锁 3D模型2023-06-22 -
Gopro 6 3D打印模型2023-08-23 -
Elegoo Phecda 十字光标激光模块与空气辅助管支架2024-04-06 -
咖啡杯 3D模型2024-04-15
最热下载
-
苹果 HomePod mini壁挂装饰2024-03-19 -
Dado - 立方体模型2024-03-24 -
P90 AEG型号空气枪到Odin Airsoft速率加载器适配器2024-05-01 -
幻想磁力2024-05-03 -
适用于Raspberry Pi5的多功能适配器外壳2025-07-27
最新模型
-
基础墙钩2024-05-08 -
简约置物架2024-05-06 -
史蒂夫·弗瑞机器人飞行器脚部与腿部组件更新版——来自《静默的运行》2024-05-06 -
支撑结构盖板与延伸部分2024-05-06 -
金属绑带与防火墙固定带2024-05-06